What requirement does the winter construction environment of waterborne coating manufacturer have?

Because now the temperature across the country has dropped significantly, some areas of the initial winter heating, has gradually entered the winter construction period. Please note the following matters for attention in winter:

Waterborne coating manufacturer

Construction environment:

1. The temperature is greater than 5 ℃, and the construction of the base surface temperature is greater than 5 ℃, assuming that the base surface temperature is less than 5 ℃, or ice, frost, or when it snows, to stop the construction exterior latex paint, wood paint, floor paint, etc.

2. When steel structure anti-corrosion coating is applied, the temperature should be above 3 degrees Celsius above dew point temperature. Waterproofing paint wholesale

3. The base temperature of the inner wall emulsion paint is recommended to be more than 10 degrees Celsius to prevent the film formation and crack due to the low temperature during film formation.

4. Pay close attention to climate change, and the environmental relative humidity should be less than 85%. Waterproofing paint wholesale

5. Stop operation 24 hours before cold wave.